I didn’t want to clog the posts so I put a few together.
1. On certain save configurations the DIP switches seem to interact with the current when not connected to anything. Adding a component temporarily fixes this behavior.
2. Breadboard components cannot visually rotate but are affected by the rotation wheel (the LCD display will sink when rotated but it does not actually turn). Only the boards themself and the voltage source rotate. This means components cannot be flipped 180º if needed. Components do follow the board direction.
3. The Multiplexed Display sim in the examples uses a 74LS76 not currently found in the component library instead of a 74HC107 which is found in the component library.
